PKT Hyperion 5.4 CUBEREVO

Tutaj rozmawiamy tylko o image mod by PKT

Re: PKT Hyperion 5.4 CUBEREVO

Postnapisał zukon sobota, 3 września 2016, 10:19

Do pobrania aktualizacja svn3472 - na prośbę @sss dodany HLS FIX do ffmpeg - THX @sss :!:
CZAS NIE &#%$!! NIE STANIE!

NIE POMAGAM NA PW!!!
OGLĄDANIE PŁATNEJ TELEWIZJI BEZ OPŁACONEGO ABONAMENTU JEST PRZESTĘPSTWEM
Avatar użytkownika
zukon
Polish Koders Team
 
Posty: 6854
Dołączył(a): piątek, 6 marca 2009, 21:13
Lokalizacja: 3miasto
Dekoder:: GI XPeed LX3

Re: PKT Hyperion 5.4 CUBEREVO

Postnapisał genie niedziela, 4 września 2016, 11:24

facet napisał(a):Jest dostępny na 9000HD plugin Oscam Status ???

Ja go pobieram do HDMU a potem ręcznie wrzucam do PKT ;)
IP9000HD(2xDVBS2+HDD500GB), IP910HD(DVBS2+HDD320GB), OpticumTS9600HD,
PIONEER PDP-LX5090, SHARP LC-32XL8E, SHARP LC-24LE220E, C+(Prestiż HD+).
genie
 
Posty: 550
Dołączył(a): niedziela, 30 sierpnia 2009, 08:29

Re: PKT Hyperion 5.4 CUBEREVO

Postnapisał zukon niedziela, 4 września 2016, 11:38

Nigdy tego nie używałem - jaka jest aktualna wersja?

Zobaczę wieczorem i wrzucę na FEED.
CZAS NIE &#%$!! NIE STANIE!

NIE POMAGAM NA PW!!!
OGLĄDANIE PŁATNEJ TELEWIZJI BEZ OPŁACONEGO ABONAMENTU JEST PRZESTĘPSTWEM
Avatar użytkownika
zukon
Polish Koders Team
 
Posty: 6854
Dołączył(a): piątek, 6 marca 2009, 21:13
Lokalizacja: 3miasto
Dekoder:: GI XPeed LX3

Re: PKT Hyperion 5.4 CUBEREVO

Postnapisał facet poniedziałek, 5 września 2016, 15:55

Powinno to wyglądać mniej więcej tak:
Obrazek
Pozdrawiam
Facet
{9000HD rev.2 + SifTeam 8873 (flash) + Hyperion V5.5 (pendrive) + HDD 250 GB >>> TV SHARP 52LE830}
"I wejrzał Pan na pracę naszą, i był zadowolony. A potem zapytawszy o zarobki nasze, usiadł i gorzko zapłakał"
facet
 
Posty: 437
Dołączył(a): czwartek, 3 września 2009, 13:24

Re: PKT Hyperion 5.4 CUBEREVO

Postnapisał Grzechu poniedziałek, 12 września 2016, 20:01

Ja mam jeszcze inny problem.
Na wersji zainstalowanej z ip9000_GIT-750_PKT-3464-NP_usb_pli_new_stm24-p0217.tar.gz
przy pierwszym uruchomieniu wszystko wydaje się ok. Wykrywa tuner dvb-s i dvb-t, znajduje kanały itd.
Niestety po restarcie, odbiornik przestaje widzieć tunery - przy próbie przejścia na jkikolwiek za kanałów krzyczy sprawdź konfigurację tunera. Co ciekawe po czystej instalacji PKT-3471 jest jeszcze gorzej ponieważ występuje efekt jak u boggio czyli na HDMI nie ma wyboru rozdzielczości i odświeżania oraz nie widzi głowic. Czyli coś co było poprawką u boggio, stało się psujką na ipbox-ie 9000HD rel.2 Prrzy okazji w image jest jakaś kaszana z uprawnieniami, pliki *.ko w /lib/modules nie mają atrybutu execute, co skutkuje np wpisem
mod: can't insert '/lib/modules/avs.ko': Input/output error
Mój log z uruchomienia (wersja 3464):

U-Boot 1.3.1 (Oct 24 2008 - 18:09:07) - stm23-2008-03-19
Board: cuberevo (0x2D42C041)
Board: 12 dotmatrix vfd front
DRAM: 128 MB
Flash: 32 MB
In: serial
Out: serial
Err: serial
Reserve 0x2010000 bytes from 0xa5ff0000 for DGS upgrade buffer.
Setup mac address.
booting...
(Re)start USB...
USB: scanning bus for devices... 2 USB Device(s) found
scanning bus for storage devices... 1 Storage Device(s) found

1794710 bytes read
## Booting image at a5ff0000 ...
Image Name: Linux-2.6.32.61_stm24_0217
Image Type: SuperH Linux Kernel Image (gzip compressed)
Data Size: 1794646 Bytes = 1.7 MB
Load Address: 84001000
Entry Point: 84002000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK

Warning: Unable to determine if kernel is built for 29- or 32-bit mode!

Starting kernel printk=1 console=ttyAS1,115200 panic=3 root=/dev/sda2 rw rootdelay=10 init=/bin/devinit ip=::: mem=128m coprocessor_mem=4m@0x10000000,4m@0x10400000 - 0x00000000 - 0 ...


INIT: version 2.88 booting

Mount /dev in tmpfs
Copying device nodes to /dev
Starting portmap daemon....
/bin/fp_control: SW Version 1.04
Model: cuberevo
vBoxType: 12
Selected Model: CUBEREVO frontpanel control utility
init
configs: DISPLAY = 1, DISPLAYCUSTOM = 1, CUSTOM = %H:%M %a %d.%m
, WAKEUPDECREMENT 300
LOADING MODULES
Starting DEBUG Interface
[mountall] Mounting local filesystems...
Cleaning /tmp.
Hostname: cuberevo.
starting telnetd
init stmfb
offset key len data
found key tvmode ->value 4
1080I-50
init AVS
insmod: can't insert '/lib/modules/avs.ko': Input/output error
load a/v firmware
copLoadFile (file /boot/audio.elf)
ustslave: Kernel Version: 24
base_address 0x10400000
seeking to 0
seeking to 5f00
seeking to 12320
seeking to 1aa20
seeking to 173100
seeking to 173138
seeking to 173170
seeking to 1b9058
seeking to 1b9060
seeking to 1b9068
seeking to 1b9070
seeking to 1d0920
seeking to 1d0a00
copLoadFile (file /boot/video.elf)
ustslave: Kernel Version: 24
base_address 0x10000000
seeking to 0
seeking to 4e020
seeking to f8378
seeking to f83b0
seeking to f83e8
seeking to 10ce98
seeking to 10cea4
seeking to 10ceb0
seeking to 12ed90
seeking to 12cd74
seeking to 12ee00
init embx
init player
init player 191
insmod: can't insert '/lib/modules/stmdvb.ko': unknown symbol in module, or unknown parameter
insmod: can't insert '/lib/modules/player2.ko': unknown symbol in module, or unknown parameter
insmod: can't insert '/lib/modules/sth264pp.ko': unknown symbol in module, or unknown parameter
insmod: can't insert '/lib/modules/stmalloc.ko': unknown symbol in module, or unknown parameter
init frontpanel
Model: cuberevo
vBoxType: 12
Input device name: "TDT RC event driver"
Selected Remote: Cuberevo RemoteControl
RemoteControl Map:
KEY_F1 - 00 - 59
KEY_F2 - 01 - 60
KEY_F3 - 02 - 61
INFO - 03 - 358
RADIO - 04 - 385
PREVIOUS - 05 - 412
EPG - 06 - 365
RECORD - 07 - 167
FAVORITES - 08 - 364
MEDIA - 09 - 226
STANDBY - 0A - 116
KEY_F5 - 0B - 63
MUTE - 0C - 113
ARCHIVE - 0D - 361
0BUTTON - 10 - 11
1BUTTON - 11 - 2
2BUTTON - 12 - 3
3BUTTON - 13 - 4
4BUTTON - 14 - 5
5BUTTON - 15 - 6
6BUTTON - 16 - 7
7BUTTON - 17 - 8
8BUTTON - 18 - 9
9BUTTON - 19 - 10
UP - 1A - 103
DOWN - 1B - 108
RIGHT - 1C - 106
LEFT - 1D - 105
REWIND - 1E - 168
OK - 1F - 352
PLAY - 20 - 207
FASTFORWARD - 21 - 208
STOP - 22 - 128
SLOW - 23 - 409
AGAIN - 24 - 129
PAUSE - 25 - 119
MENU - 26 - 139
EXIT - 27 - 174
KEY_F7 - 28 - 65
KEY_BOOMARKS - 29 - 156
RED - 2A - 398
BLUE - 2B - 401
KEY_F8 - 2C - 66
GREEN - 2D - 399
YELLOW - 2E - 400
AUDIO - 2F - 392
SUBTITLE - 30 - 370
showSinglePic /boot/bootlogo.mvi
VIDEO_SET_FORMAT failed (Bad file descriptor)
TEXT - 31 - 388
CHANNELUP - 32 - 402
CHANNELDOWN - 33 - 403
VOLUMEUP - 34 - 115
VOLUMEDOWN - 35 - 114
WWW - 36 - 150
Supports Long KeyPress: 1
processComplex >
period 10, delay 140
micom version = 0
Using period=10 delay=140
[SEM] DOWN
[mountall] Mounting local filesystems...
Hostname: cuberevo.
starting telnetd
Starting FTP server: vsftpd.
/bin/fp_control: SW Version 1.04
Model: cuberevo
vBoxType: 12
Selected Model: CUBEREVO frontpanel control utility
init
configs: DISPLAY = 1, DISPLAYCUSTOM = 1, CUSTOM = %H:%M %a %d.%m
, WAKEUPDECREMENT 300
starting e2->
init cifs
init smartcard cardreader
Setting up IP spoofing protection: init ntfs
rp_filter.
Configuring network interfaces... HDMI-CEC disabled
ip: RTNETLINK answers: File exists
ifup: interface eth0 already configured
udhcpc (v1.24.1) started
Sending discover...
Sending discover...
PYTHONPATH: /usr/lib/enigma2/python
DVB_API_VERSION 5 DVB_API_VERSION_MINOR 10
ENIGMA2_DEBUG settings: Level=3
killall: daemon: no process killed
Card Server not configured

PKT SVN-3464
fp_control: SW Version 1.04
Model: cuberevo
vBoxType: 12
Selected Model: CUBEREVO frontpanel control utility
init
configs: DISPLAY = 1, DISPLAYCUSTOM = 1, CUSTOM = %H:%M %a %d.%m
, WAKEUPDECREMENT 300
Sending discover...
/dev/dvb/adapter0/ci0: No such device
/dev/dvb/adapter0/ci1: No such device
_(Detecting SWAP partition, wait...)

_(SWAP detected on ) /dev/sda3 \n
Setting up swapspace version 1, size = 1073737728 bytes
UUID=0c893281-3177-43d2-bf53-da17662979f0

_(SWAP partition activated) \n
failed...
[MAIN] executing main
< 37.977> [HardwareInfo] Scanning hardware info
< 37.988> Detected: cuberevo
< 38.041> [Harddisk] enumerating block devices...
< 38.363> [Harddisk] new device sda -> /dev/sda -> /dev/sda
< 40.485> [SecConfigure] sec config cleared
< 40.487> [SecConfigure] sec config completed
< 45.784> [ML] BlurayPlayer not installed: cannot import name BlurayPlayer
libpng warning: iCCP: known incorrect sRGB profile
< 52.326> [iInputDevices] getInputDevices mice <ERROR: ioctl(EVIOCGNAME): [Errno 25] Inappropriate ioctl for device >
< 52.328> [iInputDevices] getInputDevices event3 <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/event3' >
< 52.330> [iInputDevices] getInputDevices mouse3 <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/mouse3' >
< 52.332> [iInputDevices] getInputDevices js3 <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/js3' >
< 52.334> [iInputDevices] getInputDevices event2 <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/event2' >
< 52.336> [iInputDevices] getInputDevices mouse2 <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/mouse2' >
< 52.338> [iInputDevices] getInputDevices js2 <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/js2' >
< 52.341> [iInputDevices] getInputDevices event1 <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/event1' >
< 52.342> [iInputDevices] getInputDevices mouse1 <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/mouse1' >
< 52.345> [iInputDevices] getInputDevices js1 <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/js1' >
< 52.347> [iInputDevices] getInputDevices event0 <ERROR: ioctl(EVIOCGNAME): [Errno 22] Invalid argument >
< 52.349> [iInputDevices] getInputDevices mouse0 <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/mouse0' >
< 52.351> [iInputDevices] getInputDevices js0 <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/js0' >
< 52.477> Selected keymap does not exist!
< 52.482> Activating language Polski
Sending discover...
Sending discover...
< 56.156> close failed in file object destructor:
< 56.159> IOError: [Errno 5] #1 error
< 56.586> close failed in file object destructor:
< 56.589> IOError: [Errno 5] Input/output error
< 57.192> [keymapparser] keymap file /usr/local/share/enigma2/keytranslation.xml not found
< 57.219> [ePopen] command: ip -o addr show dev eth0
< 57.870> [ePopen] command: killall -9 daemon &
< 57.942> [ePopen] command: /bin/fp_control -sf 1
Sending discover...
failed...
< 62.741> [SHOUTcast] desktop size 1280x725
< 62.741>
< 75.769> Plugin Extensions/WebInterface failed to load: No module named plugin
< 75.774> Plugin probably removed, but not cleanly in /usr/lib/enigma2/python/Plugins/Extensions/WebInterface
< 76.024> getModeList for port Component
< 76.028> getModeList for port Scart
< 76.030> getModeList for port HDMI
< 76.034> getModeList for port HDMI-PC
< 76.041> hotplug on dvi
< 76.066> close failed in file object destructor:
< 76.068> IOError: [Errno 5] Input/output error
< 76.071> close failed in file object destructor:
< 76.073> IOError: [Errno 5] Input/output error
< 76.076> close failed in file object destructor:
< 76.077> IOError: [Errno 5] Input/output error
< 76.080> current port not available, not setting videomode
< 76.082> current port not available, not setting videomode
< 76.085> current port not available, not setting videomode
< 76.087> current port not available, not setting videomode
< 76.089> current port not available, not setting videomode
< 76.207> --> applying pep values
< 76.209> couldn't apply pep values.
Sending discover...
< 82.035> wasTimerWakeup failed!
< 82.083> close failed in file object destructor:
< 82.085> IOError: [Errno 5] Input/output error
< 82.087> close failed in file object destructor:
< 82.089> IOError: [Errno 5] Input/output error
< 82.091> close failed in file object destructor:
< 82.092> IOError: [Errno 5] Input/output error
< 82.094> close failed in file object destructor:
< 82.096> IOError: [Errno 5] Input/output error
< 82.101> [SKIN] Parsing embedded skin <embedded-in-'PermanentClockScreen'>
Sending discover...
< 85.143> [Skin] Attribute not implemented: alphatest value: on
< 85.152> [Skin] Attribute not implemented: alphatest value: on
< 85.213> [Skin] Attribute not implemented: alphatest value: on
< 85.221> [Skin] Attribute not implemented: alphatest value: on
< 85.229> warning, skin is missing element boquet in <class 'Screens.ChannelSelection.ChannelSelection'>
< 85.566> [Skin] Error: {PKT_SilverHD/skin.xml}: pixmap file /usr/local/share/enigma2/icons/rass_logo.png not found!. Please contact the skin's author!
< 85.585> [SKIN] No skin to read...
< 85.880> RemovePopup, id = ZapError
< 86.815> setValue 50
< 87.735> playing 1:0:1:2010:24B8:13E:820000:0:0:0:
< 87.743> getResolvedKey config.usage.remote_fallback failed !! (Typo??)
Sending discover...
< 87.834> RemovePopup, id = ZapError
< 87.843> RemovePopup, id = ZapError
< 87.845> AddPopup, id = ZapError
< 88.473> [ePopen] command: route -n | grep eth0
< 89.839> [ePopen] command: fp_control -i 4 0s
< 89.849> [ePopen] command: fp_control -i 6 0s
< 90.179> nameservers: [[192, 168, 1, 1], [8, 8, 8, 8], [8, 8, 4, 4]]
< 90.182> read configured interface: {'lo': {'dhcp': False}, 'eth0': {'dhcp': True}}
< 90.184> self.ifaces after loading: {'eth0': {'preup': False, 'predown': False, 'ip': [0, 0, 0, 0], 'up': True, 'mac': '00:13:18:02:40:ab', 'dhcp': True, 'netmask': [0, 0, 0, 0], 'gateway': [0, 0, 0, 0]}}
< 90.210> AT plugin not found
< 90.213> SerienRecorder plugin not found
< 90.216> ER plugin not found
< 90.242> [OpenWebif] no plugins to load
< 90.308> [OpenWebif] started on 80
failed...
Sending discover...
Sending discover...
Sending discover...
failed...
Sending discover...
Sending discover...
Sending discover...
failed...
Sending discover...
Sending discover...
Sending discover...
failed...
Sending discover...
Sending discover...
Sending discover...
failed...
Grzechu
 
Posty: 6
Dołączył(a): poniedziałek, 12 września 2016, 19:44
Dekoder:: CUBEREVO 9000

Re: PKT Hyperion 5.4 CUBEREVO

Postnapisał zukon poniedziałek, 12 września 2016, 20:12

/lib/modules/*.ko nie muszą mieć atrybutu wykonalności

Czy zmieniałeś player2 na alternative?

Zmień pena bo może to on się sypie.

Wysłane z mojego LG-H440n przy użyciu Tapatalka
CZAS NIE &#%$!! NIE STANIE!

NIE POMAGAM NA PW!!!
OGLĄDANIE PŁATNEJ TELEWIZJI BEZ OPŁACONEGO ABONAMENTU JEST PRZESTĘPSTWEM
Avatar użytkownika
zukon
Polish Koders Team
 
Posty: 6854
Dołączył(a): piątek, 6 marca 2009, 21:13
Lokalizacja: 3miasto
Dekoder:: GI XPeed LX3

Re: PKT Hyperion 5.4 CUBEREVO

Postnapisał Grzechu poniedziałek, 12 września 2016, 20:44

Co do 3464: tak rzeczywiście zmieniałem na alternative. Co do 3471: nie, bo zaraz na początku nie widział głowic, więc nic już nie kombinowałem. Mogę jeszcze spróbować na innym pendrivie ale wątpię żeby coś to zmieniło bo sytuacja jest powtarzalna w 100%. Chociaż z drugiej strony może być coś na rzeczy. Podejrzenie z uprawnieniami wzięło się stąd, że wykonanie
insmod /lib/modules/avs.ko kończyło się błędem insmod: can't insert '/lib/modules/avs.ko': Input/output error
Po dodaniu atrybutu execute zaczęło wykonywać się bez błędów. Co ciekawe, aby odtworzyć sytuację, odebrałem atrybut, ale błąd już nie wrócił. Więc albo coś z pendrivem (ale wygląda to zawsze tak samo niezależnie od partycji na nim założonych) albo może jakaś drobna niezgodność tar-a, z tym, że użyłem tego który jest zawarty w oryginalnym firmware od Abcom. Takich problemów nie miałem na wersji 5.3, ale może rzeczywiście wtedy pendrive był jeszcze ok.
Grzechu
 
Posty: 6
Dołączył(a): poniedziałek, 12 września 2016, 19:44
Dekoder:: CUBEREVO 9000

Re: PKT Hyperion 5.4 CUBEREVO

Postnapisał Grzechu wtorek, 13 września 2016, 22:21

Niestety to nie jest problem z pendrivem.
Żeby nie zaciemniać sytuacji, skupiłem się na ostatniej wersji ip9000_GIT-750_PKT-3471-NP_usb_pli_new_stm24-p0217.tar.gz
Użyłem zupełnie innego pendrive-a.
Założyłem na nim 2 partycje podstawowe pierwszą ext2 512MB i drugą Linux Swap 256MB
Instalację wykonałem na partycji /dev/sda1 (czyli tej 512MB) w następujący sposób:
zamontowałem partycję
mount /dev/sda1 /mnt/usb/usb0
Zapisałem ip9000_GIT-750_PKT-3471-NP_usb_pli_new_stm24-p0217.tar.gz w /mnt/usb/usb0
sync
cd /mnt/usb/usb0
tar zxf ip9000_GIT-750_PKT-3471-NP_usb_pli_new_stm24-p0217.tar.gz
sync
umount /dev/sda1
restart odbiornika i wybranie w multiboot startu enigma2 z /dev/sda1

Problem wygląda identycznie, jak poprzednio. Przy pierwszym uruchomieniu nie ma możliwości wyboru parametrów HDMI oraz nie zostają wykryte głowice tunerów dvb-s2 i dvb-t (kreator w ogóle pomija ten etap). Po restarcie nadal nie widać głowic. Log z uruchomienia (kolejnego, nie pierwszego):

U-Boot 1.3.1 (Oct 24 2008 - 18:09:07) - stm23-2008-03-19
Board: cuberevo (0x2D42C041)
Board: 12 dotmatrix vfd front
DRAM: 128 MB
Flash: 32 MB
In: serial
Out: serial
Err: serial
Reserve 0x2010000 bytes from 0xa5ff0000 for DGS upgrade buffer.
Setup mac address.
booting...
(Re)start USB...
USB: scanning bus for devices... 2 USB Device(s) found
scanning bus for storage devices... 1 Storage Device(s) found

1794710 bytes read
## Booting image at a5ff0000 ...
Image Name: Linux-2.6.32.61_stm24_0217
Image Type: SuperH Linux Kernel Image (gzip compressed)
Data Size: 1794646 Bytes = 1.7 MB
Load Address: 84001000
Entry Point: 84002000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK

Warning: Unable to determine if kernel is built for 29- or 32-bit mode!

Starting kernel printk=1 console=ttyAS1,115200 panic=3 root=/dev/sda1 rw rootdelay=10 init=/bin/devinit ip=::: mem=128m coprocessor_mem=4m@0x10000000,4m@0x10400000 - 0x00000000 - 0 ...


INIT: version 2.88 booting

Mount /dev in tmpfs
Copying device nodes to /dev
Starting portmap daemon....
/bin/fp_control: SW Version 1.04
Model: cuberevo
vBoxType: 12
Selected Model: CUBEREVO frontpanel control utility
init
configs: DISPLAY = 1, DISPLAYCUSTOM = 1, CUSTOM = %H:%M %a %d.%m
, WAKEUPDECREMENT 300
LOADING MODULES
Starting DEBUG Interface
[mountall] Mounting local filesystems...
Cleaning /tmp.
Hostname: cuberevo.
starting telnetd
init stmfb
offset key len data
found key tvmode ->value 4
1080I-50
init AVS
insmod: can't insert '/lib/modules/avs.ko': Input/output error
load a/v firmware
copLoadFile (file /boot/audio.elf)
ustslave: Kernel Version: 24
base_address 0x10400000
seeking to 0
seeking to 5f00
seeking to 12320
seeking to 1aa20
seeking to 173100
seeking to 173138
seeking to 173170
seeking to 1b9058
seeking to 1b9060
seeking to 1b9068
seeking to 1b9070
seeking to 1d0920
seeking to 1d0a00
copLoadFile (file /boot/video.elf)
ustslave: Kernel Version: 24
base_address 0x10000000
seeking to 0
seeking to 4e020
seeking to f8378
seeking to f83b0
seeking to f83e8
seeking to 10ce98
seeking to 10cea4
seeking to 10ceb0
seeking to 12ed90
seeking to 12cd74
seeking to 12ee00
init embx
init player
init player 191
insmod: can't insert '/lib/modules/stmdvb.ko': unknown symbol in module, or unknown parameter
insmod: can't insert '/lib/modules/player2.ko': unknown symbol in module, or unknown parameter
insmod: can't insert '/lib/modules/sth264pp.ko': unknown symbol in module, or unknown parameter
insmod: can't insert '/lib/modules/stmalloc.ko': unknown symbol in module, or unknown parameter
init frontpanel
showSinglePic /boot/bootlogo.mvi
VIDEO_SET_FORMAT failed (Bad file descriptor)
[mountall] Mounting local filesystems...
Model: cuberevo
vBoxType: 12
Input device name: "TDT RC event driver"
Selected Remote: Cuberevo RemoteControl
RemoteControl Map:
KEY_F1 - 00 - 59
KEY_F2 - 01 - 60
KEY_F3 - 02 - 61
INFO - 03 - 358
RADIO - 04 - 385
PREVIOUS - 05 - 412
EPG - 06 - 365
RECORD - 07 - 167
FAVORITES - 08 - 364
MEDIA - 09 - 226
STANDBY - 0A - 116
KEY_F5 - 0B - 63
MUTE - 0C - 113
ARCHIVE - 0D - 361
0BUTTON - 10 - 11
1BUTTON - 11 - 2
2BUTTON - 12 - 3
3BUTTON - 13 - 4
4BUTTON - 14 - 5
5BUTTON - 15 - 6
6BUTTON - 16 - 7
7BUTTON - 17 - 8
8BUTTON - 18 - 9
9BUTTON - 19 - 10
UP - 1A - 103
DOWN - 1B - 108
RIGHT - 1C - 106
LEFT - 1D - 105
REWIND - 1E - 168
OK - 1F - 352
PLAY - 20 - 207
FASTFORWARD - 21 - 208
STOP - 22 - 128
SLOW - 23 - 409
AGAIN - 24 - 129
PAUSE - 25 - 119
MENU - 26 - 139
EXIT - 27 - 174
KEY_F7 - 28 - 65
KEY_BOOMARKS - 29 - 156
RED - 2A - 398
BLUE - 2B - 401
KEY_F8 - 2C - 66
GREEN - 2D - 399
YELLOW - 2E - 400
AUDIO - 2F - 392
SUBTITLE - 30 - 370
TEXT - 31 - 388
CHANNELUP - 32 - 402
CHANNELDOWN - 33 - 403
VOLUMEUP - 34 - 115
VOLUMEDOWN - 35 - 114
WWW - 36 - 150
Supports Long KeyPress: 1
processComplex >
period 10, delay 140
micom version = 0
Using period=10 delay=140
[SEM] DOWN
Hostname: cuberevo.
starting telnetd
Starting FTP server: vsftpd.
/bin/fp_control: SW Version 1.04
Model: cuberevo
vBoxType: 12
Selected Model: CUBEREVO frontpanel control utility
init
configs: DISPLAY = 1, DISPLAYCUSTOM = 1, CUSTOM = %H:%M %a %d.%m
, WAKEUPDECREMENT 300
starting e2->
init cifs
Setting up IP spoofing protection: rp_filter.
init smartcard cardreader
Configuring network interfaces... init ntfs
ip: RTNETLINK answers: File exists
HDMI-CEC disabled
ifup: interface eth0 already configured
udhcpc (v1.24.1) started
Sending discover...
Sending discover...
PYTHONPATH: /usr/lib/enigma2/python
DVB_API_VERSION 5 DVB_API_VERSION_MINOR 10
ENIGMA2_DEBUG settings: Level=3
killall: daemon: no process killed
Sending select for 192.168.1.105...
Lease of 192.168.1.105 obtained, lease time 86400
route: SIOCDELRT: No such process
adding dns 192.168.1.1
adding dns 8.8.8.8
adding dns 8.8.4.4
done.
Card Server not configured

PKT SVN-3471
fp_control: SW Version 1.04
Model: cuberevo
vBoxType: 12
Selected Model: CUBEREVO frontpanel control utility
init
configs: DISPLAY = 1, DISPLAYCUSTOM = 1, CUSTOM = %H:%M %a %d.%m
, WAKEUPDECREMENT 300
/dev/dvb/adapter0/ci0: No such device
/dev/dvb/adapter0/ci1: No such device
_(Detecting SWAP partition, wait...)

_(SWAP detected on ) /dev/sda2 \n
Setting up swapspace version 1, size = 263204864 bytes
UUID=4d367acf-4521-4f2e-9d70-18bb3467fad9

_(SWAP partition activated) \n
[MAIN] executing main
close failed in file object destructor:
IOError: [Errno 5] Input/output error
< 35.797> close failed in file object destructor:
< 35.800> IOError: [Errno 5] Input/output error
< 35.880> close failed in file object destructor:
< 35.882> IOError: [Errno 5] Input/output error
< 35.930> close failed in file object destructor:
< 35.933> IOError: [Errno 5] Input/output error
< 36.228> close failed in file object destructor:
< 36.230> IOError: [Errno 5] Input/output error
< 36.523> [HardwareInfo] Scanning hardware info
< 36.534> Detected: cuberevo
< 36.588> [Harddisk] enumerating block devices...
< 36.924> [Harddisk] new device sda -> /dev/sda -> /dev/sda
< 37.179> close failed in file object destructor:
< 37.181> IOError: [Errno 5] Input/output error
< 38.124> close failed in file object destructor:
< 38.125> IOError: [Errno 5] Input/output error
< 38.143> close failed in file object destructor:
< 38.145> IOError: [Errno 5] Input/output error
< 38.148> close failed in file object destructor:
< 38.150> IOError: [Errno 5] Input/output error
< 38.153> close failed in file object destructor:
< 38.154> IOError: [Errno 5] Input/output error
< 39.057> [SecConfigure] sec config cleared
< 39.058> [SecConfigure] sec config completed
< 44.434> [ML] BlurayPlayer not installed: cannot import name BlurayPlayer
< 44.519> close failed in file object destructor:
< 44.521> IOError: [Errno 5] Input/output error
< 44.707> close failed in file object destructor:
< 44.708> IOError: [Errno 5] Input/output error
< 44.711> close failed in file object destructor:
< 44.713> IOError: [Errno 5] Input/output error
< 44.740> close failed in file object destructor:
< 44.742> IOError: [Errno 5] Input/output error
< 44.746> close failed in file object destructor:
< 44.747> IOError: [Errno 5] Input/output error
< 44.750> close failed in file object destructor:
< 44.752> IOError: [Errno 5] Input/output error
< 45.138> close failed in file object destructor:
< 45.141> IOError: [Errno 5] Input/output error
< 45.235> close failed in file object destructor:
< 45.237> IOError: [Errno 5] Input/output error
< 45.302> close failed in file object destructor:
< 45.304> IOError: [Errno 5] Input/output error
< 45.307> close failed in file object destructor:
< 45.309> IOError: [Errno 5] Input/output error
< 45.809> close failed in file object destructor:
< 45.810> IOError: [Errno 5] Input/output error
< 45.814> close failed in file object destructor:
< 45.816> IOError: [Errno 5] Input/output error
< 45.835> close failed in file object destructor:
< 45.837> IOError: [Errno 5] Input/output error
< 46.854> close failed in file object destructor:
< 46.856> IOError: [Errno 5] Input/output error
< 46.889> close failed in file object destructor:
< 46.891> IOError: [Errno 5] Input/output error
< 46.912> close failed in file object destructor:
< 46.914> IOError: [Errno 5] Input/output error
< 46.917> close failed in file object destructor:
< 46.919> IOError: [Errno 5] Input/output error
< 46.925> close failed in file object destructor:
< 46.927> IOError: [Errno 5] Input/output error
< 46.963> close failed in file object destructor:
< 46.964> IOError: [Errno 5] Input/output error
< 49.843> close failed in file object destructor:
< 49.845> IOError: [Errno 5] Input/output error
< 49.848> close failed in file object destructor:
< 49.850> IOError: [Errno 5] Input/output error
< 50.016> close failed in file object destructor:
< 50.018> IOError: [Errno 5] Input/output error
< 50.021> close failed in file object destructor:
< 50.022> IOError: [Errno 5] Input/output error
< 50.173> close failed in file object destructor:
< 50.175> IOError: [Errno 5] Input/output error
< 50.185> close failed in file object destructor:
< 50.188> IOError: [Errno 5] Input/output error
< 50.195> close failed in file object destructor:
< 50.198> IOError: [Errno 5] Input/output error
< 50.209> close failed in file object destructor:
< 50.210> IOError: [Errno 5] Input/output error
< 50.242> close failed in file object destructor:
< 50.243> IOError: [Errno 5] Input/output error
< 50.270> close failed in file object destructor:
< 50.272> IOError: [Errno 5] Input/output error
< 50.276> close failed in file object destructor:
< 50.278> IOError: [Errno 5] Input/output error
libpng warning: iCCP: known incorrect sRGB profile
< 50.929> close failed in file object destructor:
< 50.931> IOError: [Errno 5] Input/output error
< 50.944> [iInputDevices] getInputDevices mice <ERROR: ioctl(EVIOCGNAME): [Errno 25] Inappropriate ioctl for device >
< 50.947> [iInputDevices] getInputDevices event3 <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/event3' >
< 50.949> [iInputDevices] getInputDevices mouse3 <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/mouse3' >
< 50.951> [iInputDevices] getInputDevices js3 <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/js3' >
< 50.953> [iInputDevices] getInputDevices event2 <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/event2' >
< 50.955> [iInputDevices] getInputDevices mouse2 <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/mouse2' >
< 50.957> [iInputDevices] getInputDevices js2 <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/js2' >
< 50.959> [iInputDevices] getInputDevices event1 <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/event1' >
< 50.961> [iInputDevices] getInputDevices mouse1 <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/mouse1' >
< 50.963> [iInputDevices] getInputDevices js1 <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/js1' >
< 50.966> [iInputDevices] getInputDevices event0 <ERROR: ioctl(EVIOCGNAME): [Errno 22] Invalid argument >
< 50.968> [iInputDevices] getInputDevices mouse0 <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/mouse0' >
< 50.970> [iInputDevices] getInputDevices js0 <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/js0' >
< 50.993> close failed in file object destructor:
< 50.995> IOError: [Errno 5] Input/output error
< 51.105> Selected keymap does not exist!
< 51.111> Activating language Polski
< 54.720> close failed in file object destructor:
< 54.722> IOError: [Errno 5] Input/output error
< 54.805> close failed in file object destructor:
< 54.806> IOError: [Errno 5] Input/output error
< 54.812> close failed in file object destructor:
< 54.813> IOError: [Errno 5] Input/output error
< 54.837> close failed in file object destructor:
< 54.838> IOError: [Errno 5] Input/output error
< 55.329> close failed in file object destructor:
< 55.331> IOError: [Errno 5] Input/output error
< 55.444> close failed in file object destructor:
< 55.446> IOError: [Errno 5] Input/output error
< 55.989> [keymapparser] keymap file /usr/local/share/enigma2/keytranslation.xml not found
< 55.992> close failed in file object destructor:
< 55.994> IOError: [Errno 5] Input/output error
< 56.017> [ePopen] command: ip -o addr show dev eth0
< 56.023> close failed in file object destructor:
< 56.029> IOError: [Errno 5] Input/output error
< 56.070> close failed in file object destructor:
< 56.077> IOError: [Errno 5] Input/output error
< 56.090> close failed in file object destructor:
< 56.092> IOError: [Errno 5] Input/output error
< 56.121> close failed in file object destructor:
< 56.123> IOError: [Errno 5] Input/output error
< 56.128> close failed in file object destructor:
< 56.129> IOError: [Errno 5] Input/output error
< 56.141> close failed in file object destructor:
< 56.143> IOError: [Errno 5] Input/output error
< 56.215> close failed in file object destructor:
< 56.216> IOError: [Errno 5] Input/output error
< 56.388> close failed in file object destructor:
< 56.390> IOError: [Errno 5] Input/output error
< 56.593> close failed in file object destructor:
< 56.595> IOError: [Errno 5] Input/output error
< 56.614> close failed in file object destructor:
< 56.616> IOError: [Errno 5] Input/output error
< 56.686> [ePopen] command: killall -9 daemon &
< 56.749> [ePopen] command: /bin/fp_control -sf 1
< 56.773> close failed in file object destructor:
< 56.784> IOError: [Errno 5] Input/output error
< 56.902> close failed in file object destructor:
< 56.905> IOError: [Errno 5] Input/output error
< 56.987> close failed in file object destructor:
< 56.989> IOError: [Errno 5] Input/output error
< 57.047> close failed in file object destructor:
< 57.049> IOError: [Errno 5] Input/output error
< 57.124> close failed in file object destructor:
< 57.126> IOError: [Errno 5] Input/output error
< 57.237> close failed in file object destructor:
< 57.239> IOError: [Errno 5] Input/output error
< 57.281> close failed in file object destructor:
< 57.283> IOError: [Errno 5] Input/output error
< 57.344> close failed in file object destructor:
< 57.346> IOError: [Errno 5] Input/output error
< 57.412> close failed in file object destructor:
< 57.414> IOError: [Errno 5] Input/output error
< 61.616> [SHOUTcast] desktop size 1280x725
< 61.617>
< 61.639> close failed in file object destructor:
< 61.641> IOError: [Errno 5] Input/output error
< 61.729> close failed in file object destructor:
< 61.731> IOError: [Errno 5] Input/output error
< 61.984> close failed in file object destructor:
< 61.986> IOError: [Errno 5] Input/output error
< 62.013> close failed in file object destructor:
< 62.015> IOError: [Errno 5] Input/output error
< 62.054> close failed in file object destructor:
< 62.056> IOError: [Errno 5] Input/output error
< 62.118> close failed in file object destructor:
< 62.120> IOError: [Errno 5] Input/output error
< 62.209> close failed in file object destructor:
< 62.211> IOError: [Errno 5] Input/output error
< 62.311> close failed in file object destructor:
< 62.315> IOError: [Errno 5] Input/output error
< 62.660> close failed in file object destructor:
< 62.662> IOError: [Errno 5] Input/output error
< 62.813> close failed in file object destructor:
< 62.815> IOError: [Errno 5] Input/output error
< 62.821> close failed in file object destructor:
< 62.823> IOError: [Errno 5] Input/output error
< 62.877> close failed in file object destructor:
< 62.879> IOError: [Errno 5] Input/output error
< 63.115> close failed in file object destructor:
< 63.117> IOError: [Errno 5] Input/output error
< 63.204> close failed in file object destructor:
< 63.206> IOError: [Errno 5] Input/output error
< 63.232> close failed in file object destructor:
< 63.234> IOError: [Errno 5] Input/output error
< 63.334> close failed in file object destructor:
< 63.335> IOError: [Errno 5] Input/output error
< 63.416> close failed in file object destructor:
< 63.418> IOError: [Errno 5] Input/output error
< 63.471> close failed in file object destructor:
< 63.472> IOError: [Errno 5] Input/output error
< 63.478> close failed in file object destructor:
< 63.480> IOError: [Errno 5] Input/output error
< 73.293> close failed in file object destructor:
< 73.295> IOError: [Errno 5] Input/output error
< 73.368> close failed in file object destructor:
< 73.370> IOError: [Errno 5] Input/output error
< 73.422> close failed in file object destructor:
< 73.424> IOError: [Errno 5] Input/output error
< 73.521> close failed in file object destructor:
< 73.522> IOError: [Errno 5] Input/output error
< 73.687> close failed in file object destructor:
< 73.689> IOError: [Errno 5] Input/output error
< 73.698> Plugin Extensions/WebInterface failed to load: No module named plugin
< 73.702> Plugin probably removed, but not cleanly in /usr/lib/enigma2/python/Plugins/Extensions/WebInterface
< 73.709> close failed in file object destructor:
< 73.711> IOError: [Errno 5] Input/output error
< 73.869> close failed in file object destructor:
< 73.872> IOError: [Errno 5] Input/output error
< 73.916> close failed in file object destructor:
< 73.918> IOError: [Errno 5] Input/output error
< 73.960> getModeList for port Component
< 73.964> getModeList for port Scart
< 73.966> getModeList for port HDMI
< 73.969> getModeList for port HDMI-PC
< 73.978> hotplug on dvi
< 74.001> close failed in file object destructor:
< 74.003> IOError: [Errno 5] Input/output error
< 74.006> close failed in file object destructor:
< 74.008> IOError: [Errno 5] Input/output error
< 74.010> close failed in file object destructor:
< 74.012> IOError: [Errno 5] Input/output error
< 74.015> current port not available, not setting videomode
< 74.017> current port not available, not setting videomode
< 74.020> current port not available, not setting videomode
< 74.022> current port not available, not setting videomode
< 74.024> current port not available, not setting videomode
< 74.034> close failed in file object destructor:
< 74.036> IOError: [Errno 5] Input/output error
< 74.085> close failed in file object destructor:
< 74.087> IOError: [Errno 5] Input/output error
< 74.154> --> applying pep values
< 74.156> couldn't apply pep values.
< 74.167> close failed in file object destructor:
< 74.169> IOError: [Errno 5] Input/output error
< 74.188> close failed in file object destructor:
< 74.190> IOError: [Errno 5] Input/output error
< 74.489> close failed in file object destructor:
< 74.490> IOError: [Errno 5] Input/output error
< 74.514> close failed in file object destructor:
< 74.515> IOError: [Errno 5] Input/output error
< 74.534> close failed in file object destructor:
< 74.536> IOError: [Errno 5] Input/output error
< 74.631> close failed in file object destructor:
< 74.634> IOError: [Errno 5] Input/output error
< 74.649> close failed in file object destructor:
< 74.651> IOError: [Errno 5] Input/output error
< 74.658> close failed in file object destructor:
< 74.659> IOError: [Errno 5] Input/output error
< 74.687> close failed in file object destructor:
< 74.689> IOError: [Errno 5] Input/output error
< 74.717> close failed in file object destructor:
< 74.719> IOError: [Errno 5] Input/output error
< 78.437> close failed in file object destructor:
< 78.439> IOError: [Errno 5] Input/output error
< 78.539> close failed in file object destructor:
< 78.542> IOError: [Errno 5] Input/output error
< 78.575> close failed in file object destructor:
< 78.577> IOError: [Errno 5] Input/output error
< 78.785> close failed in file object destructor:
< 78.789> IOError: [Errno 5] Input/output error
< 78.804> wasTimerWakeup failed!
< 78.843> close failed in file object destructor:
< 78.845> IOError: [Errno 5] Input/output error
< 78.847> close failed in file object destructor:
< 78.849> IOError: [Errno 5] Input/output error
< 78.851> close failed in file object destructor:
< 78.853> IOError: [Errno 5] Input/output error
< 78.855> close failed in file object destructor:
< 78.858> IOError: [Errno 5] Input/output error
< 78.863> [SKIN] Parsing embedded skin <embedded-in-'PermanentClockScreen'>
< 78.979> close failed in file object destructor:
< 78.981> IOError: [Errno 5] Input/output error
< 81.925> [Skin] Attribute not implemented: alphatest value: on
< 81.935> [Skin] Attribute not implemented: alphatest value: on
< 81.988> [Skin] Attribute not implemented: alphatest value: on
< 81.997> [Skin] Attribute not implemented: alphatest value: on
< 82.004> warning, skin is missing element boquet in <class 'Screens.ChannelSelection.ChannelSelection'>
< 82.338> [Skin] Error: {PKT_SilverHD/skin.xml}: pixmap file /usr/local/share/enigma2/icons/rass_logo.png not found!. Please contact the skin's author!
< 82.358> [SKIN] No skin to read...
< 82.661> RemovePopup, id = ZapError
< 83.514> close failed in file object destructor:
< 83.515> IOError: [Errno 5] Input/output error
< 83.602> setValue 50
< 83.607> close failed in file object destructor:
< 83.609> IOError: [Errno 5] Input/output error
< 83.626> close failed in file object destructor:
< 83.628> IOError: [Errno 5] Input/output error
< 83.631> close failed in file object destructor:
< 83.633> IOError: [Errno 5] Input/output error
< 83.732> playing 1:0:1:3ABD:514:13E:820000:0:0:0:
< 83.747> getResolvedKey config.usage.remote_fallback failed !! (Typo??)
< 83.963> RemovePopup, id = ZapError
< 83.984> RemovePopup, id = ZapError
< 83.985> AddPopup, id = ZapError
< 84.817> [ePopen] command: route -n | grep eth0
< 84.961> [ePopen] command: fp_control -i 4 0s
< 84.971> [ePopen] command: fp_control -i 6 0s
< 86.243> 192.168
< 86.244> 0.0.0.0
< 86.286> nameservers: [[192, 168, 1, 1], [8, 8, 8, 8], [8, 8, 4, 4]]
< 86.289> read configured interface: {'lo': {'dhcp': False}, 'eth0': {'dhcp': True}}
< 86.291> self.ifaces after loading: {'eth0': {'preup': False, 'predown': False, 'ip': [192, 168, 1, 105], 'up': True, 'mac': '00:13:18:02:40:ab', 'dhcp': True, 'bcast': [192, 168, 1, 255], 'netmask': [255, 255, 255, 0], 'gateway': [192, 168, 1, 1]}}
< 86.316> AT plugin not found
< 86.319> SerienRecorder plugin not found
< 86.322> ER plugin not found
< 86.350> [OpenWebif] no plugins to load
< 86.416> [OpenWebif] started on 80

O co może chodzić?
Grzechu
 
Posty: 6
Dołączył(a): poniedziałek, 12 września 2016, 19:44
Dekoder:: CUBEREVO 9000

Re: PKT Hyperion 5.4 CUBEREVO

Postnapisał Grzechu wtorek, 13 września 2016, 23:00

Jeszcze log z pierwszego uruchomienia, może on coś wyjaśni. Obejmuje on okres od uruchomienia do wybrania HDMI. Dalej nie mogłem przejść ponieważ port szeregowy mam tylko na starej stacjonarce, która stoi w innym pokoju niż TV i musiałem wybierać na ślepo.
U-Boot 1.3.1 (Oct 24 2008 - 18:09:07) - stm23-2008-03-19
Board: cuberevo (0x2D42C041)
Board: 12 dotmatrix vfd front
DRAM: 128 MB
Flash: 32 MB
In: serial
Out: serial
Err: serial
Reserve 0x2010000 bytes from 0xa5ff0000 for DGS upgrade buffer.
Setup mac address.
Saving Environment to Flash...
Un-Protected 1 sectors
Erasing Flash...
.
Erased 1 sectors
Writing to Flash... done
Protected 1 sectors
(Re)start USB...
USB: scanning bus for devices... 2 USB Device(s) found
scanning bus for storage devices... 1 Storage Device(s) found

1794710 bytes read
## Booting image at a5ff0000 ...
Image Name: Linux-2.6.32.61_stm24_0217
Image Type: SuperH Linux Kernel Image (gzip compressed)
Data Size: 1794646 Bytes = 1.7 MB
Load Address: 84001000
Entry Point: 84002000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK

Warning: Unable to determine if kernel is built for 29- or 32-bit mode!

Starting kernel printk=1 console=ttyAS1,115200 panic=3 root=/dev/sda1 rw rootdelay=10 init=/bin/devinit ip=::: mem=128m coprocessor_mem=4m@0x10000000,4m@0x10400000 - 0x00000000 - 0 ...


INIT: version 2.88 booting

WAIT 1st start
Seems to be the first run - Making devices in /dev...
[makedev] Starting makedev...
CI-slot(s) : Yes
Tuners : 2
HDMI CEC : No
[makedev] done.
Mount /dev in tmpfs
Copying device nodes to /dev
Starting portmap daemon....
/bin/fp_control: SW Version 1.04
Model: cuberevo
vBoxType: 12
Selected Model: CUBEREVO frontpanel control utility
init
configs: DISPLAY = 1, DISPLAYCUSTOM = 1, CUSTOM = %H:%M %a %d.%m
, WAKEUPDECREMENT 300
LOADING MODULES
Starting DEBUG Interface
[mountall] Mounting local filesystems...
Cleaning /tmp /var/run /var/lock.
Hostname: cuberevo.
starting telnetd
init stmfb
offset key len data
found key tvmode ->value 4
1080I-50
init AVS
insmod: can't insert '/lib/modules/avs.ko': Input/output error
load a/v firmware
copLoadFile (file /boot/audio.elf)
ustslave: Kernel Version: 24
base_address 0x10400000
seeking to 0
seeking to 5f00
seeking to 12320
seeking to 1aa20
seeking to 173100
seeking to 173138
seeking to 173170
seeking to 1b9058
seeking to 1b9060
seeking to 1b9068
seeking to 1b9070
seeking to 1d0920
seeking to 1d0a00
copLoadFile (file /boot/video.elf)
ustslave: Kernel Version: 24
base_address 0x10000000
seeking to 0
seeking to 4e020
seeking to f8378
seeking to f83b0
seeking to f83e8
seeking to 10ce98
seeking to 10cea4
seeking to 10ceb0
seeking to 12ed90
seeking to 12cd74
seeking to 12ee00
init embx
init player
init player 191
insmod: can't insert '/lib/modules/stmdvb.ko': unknown symbol in module, or unknown parameter
insmod: can't insert '/lib/modules/player2.ko': unknown symbol in module, or unknown parameter
insmod: can't insert '/lib/modules/sth264pp.ko': unknown symbol in module, or unknown parameter
insmod: can't insert '/lib/modules/stmalloc.ko': unknown symbol in module, or unknown parameter
init frontpanel
Model: cuberevo
vBoxType: 12
Input device name: "TDT RC event driver"
Selected Remote: Cuberevo RemoteControl
RemoteControl Map:
KEY_F1 - 00 - 59
KEY_F2 - 01 - 60
KEY_F3 - 02 - 61
INFO - 03 - 358
RADIO - 04 - 385
PREVIOUS - 05 - 412
EPG - 06 - 365
RECORD - 07 - 167
FAVORITES - 08 - 364
MEDIA - 09 - 226
STANDBY - 0A - 116
KEY_F5 - 0B - 63
MUTE - 0C - 113
ARCHIVE - 0D - 361
0BUTTON - 10 - 11
1BUTTON - 11 - 2
2BUTTON - 12 - 3
3BUTTON - 13 - 4
4BUTTON - 14 - 5
5BUTTON - 15 - 6
6BUTTON - 16 - 7
7BUTTON - 17 - 8
8BUTTON - 18 - 9
9BUTTON - 19 - 10
UP - 1A - 103
DOWN - 1B - 108
RIGHT - 1C - 106
LEFT - 1D - 105
REWIND - 1E - 168
OK - 1F - 352
PLAY - 20 - 207
FASTFORWARD - 21 - 208
STOP - 22 - 128
SLOW - 23 - 409
AGAIN - 24 - 129
PAUSE - 25 - 119
MENU - 26 - 139
EXIT - 27 - 174
KEY_F7 - 28 - 65
KEY_BOOMARKS - 29 - 156
RED - 2A - 398
BLUE - 2B - 401
KEY_F8 - 2C - 66
GREEN - 2D - 399
YELLOW - 2E - 400
AUDIO - 2F - 392
SUBTITLE - 30 - 370
TEXT - 31 - 388
CHANNELUP - 32 - 402
CHANNELDOWN - 33 - 403
VOLUMEUP - 34 - 115
VOLUMEDOWN - 35 - 114
WWW - 36 - 150
Supports Long KeyPress: 1
processComplex >
period 10, delay 140
micom version = 0
Using period=10 delay=140
showSinglePic /boot/bootlogo.mvi
VIDEO_SET_FORMAT failed (Bad file descriptor)
[SEM] DOWN
[mountall] Mounting local filesystems...
Hostname: cuberevo.
starting telnetd
Starting FTP server: vsftpd.
detected 1stboot - no network configured
/bin/fp_control: SW Version 1.04
Model: cuberevo
vBoxType: 12
Selected Model: CUBEREVO frontpanel control utility
init
configs: DISPLAY = 1, DISPLAYCUSTOM = 1, CUSTOM = %H:%M %a %d.%m
, WAKEUPDECREMENT 300
starting e2->
init cifs
init smartcard cardreader
init ntfs
HDMI-CEC disabled

(enigma2:4855): GStreamer-WARNING **: External plugin loader failed. This most likely means that the plugin loader helper binary was not found or could not be run. You might need to set the GST_PLUGIN_SCANNER environment variable if your setup is unusual. This should normally not be required though.
killall: daemon: no process killed
Card Server not configured

PKT SVN-3471
fp_control: SW Version 1.04
Model: cuberevo
vBoxType: 12
Selected Model: CUBEREVO frontpanel control utility
init
configs: DISPLAY = 1, DISPLAYCUSTOM = 1, CUSTOM = %H:%M %a %d.%m
, WAKEUPDECREMENT 300
_(Detecting SWAP partition, wait...)

_(SWAP detected on ) /dev/sda2 \n
Setting up swapspace version 1, size = 263204864 bytes
UUID=2a67f287-6c18-41cb-8055-c3386bda7a50

_(SWAP partition activated) \n
PYTHONPATH: /usr/lib/enigma2/python
DVB_API_VERSION 5 DVB_API_VERSION_MINOR 10
ENIGMA2_DEBUG settings: Level=3
/dev/dvb/adapter0/ci0: No such device
/dev/dvb/adapter0/ci1: No such device
[MAIN] executing main
no profile data available
< 108.155> [HardwareInfo] Scanning hardware info
< 108.167> Detected: cuberevo
< 108.215> [Harddisk] enumerating block devices...
< 108.554> [Harddisk] new device sda -> /dev/sda -> /dev/sda
< 110.640> [SecConfigure] sec config cleared
< 110.641> [SecConfigure] sec config completed
< 116.050> [ML] BlurayPlayer not installed: cannot import name BlurayPlayer
< 117.290> [InfoBar] Failed to load resumepoints: [Errno 2] No such file or directory: '/etc/enigma2/resumepoints.pkl'
libpng warning: iCCP: known incorrect sRGB profile
< 123.655> [iInputDevices] getInputDevices mice <ERROR: ioctl(EVIOCGNAME): [Errno 25] Inappropriate ioctl for device >
< 123.657> [iInputDevices] getInputDevices event3 <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/event3' >
< 123.659> [iInputDevices] getInputDevices mouse3 <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/mouse3' >
< 123.661> [iInputDevices] getInputDevices js3 <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/js3' >
< 123.663> [iInputDevices] getInputDevices event2 <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/event2' >
< 123.665> [iInputDevices] getInputDevices mouse2 <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/mouse2' >
< 123.667> [iInputDevices] getInputDevices js2 <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/js2' >
< 123.669> [iInputDevices] getInputDevices event1 <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/event1' >
< 123.671> [iInputDevices] getInputDevices mouse1 <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/mouse1' >
< 123.673> [iInputDevices] getInputDevices js1 <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/js1' >
< 123.676> [iInputDevices] getInputDevices event0 <ERROR: ioctl(EVIOCGNAME): [Errno 22] Invalid argument >
< 123.678> [iInputDevices] getInputDevices mouse0 <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/mouse0' >
< 123.680> [iInputDevices] getInputDevices js0 <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/js0' >
< 123.807> Selected keymap does not exist!
< 123.812> Activating language English
< 125.810> close failed in file object destructor:
< 125.812> IOError: [Errno 5] Input/output error
< 126.319> close failed in file object destructor:
< 126.381> IOError: [Errno 5] Input/output error
< 130.300> [keymapparser] keymap file /usr/local/share/enigma2/keytranslation.xml not found
< 132.355> [ePopen] command: ip -o addr show dev eth0
< 142.964> [ePopen] command: killall -9 daemon &
< 143.028> [ePopen] command: /bin/fp_control -sf 1
< 147.685> [SHOUTcast] desktop size 1280x725
< 147.686>
< 165.004> getModeList for port Component
< 165.008> getModeList for port Scart
< 165.010> getModeList for port HDMI
< 165.014> getModeList for port HDMI-PC
< 165.021> hotplug on dvi
< 165.043> close failed in file object destructor:
< 165.045> IOError: [Errno 5] Input/output error
< 165.047> close failed in file object destructor:
< 165.049> IOError: [Errno 5] Input/output error
< 165.052> close failed in file object destructor:
< 165.054> IOError: [Errno 5] Input/output error
< 165.056> current port not available, not setting videomode
< 165.059> current port not available, not setting videomode
< 165.061> current port not available, not setting videomode
< 165.064> current port not available, not setting videomode
< 165.066> current port not available, not setting videomode
< 165.188> --> applying pep values
< 165.190> couldn't apply pep values.
< 165.648> [NetworkBrowser] fallback to default translation for NetworkBrowser
< 165.667> [NetworkBrowser] fallback to default translation for Search for network shares
< 165.687> [NetworkBrowser] fallback to default translation for MountManager
< 165.707> [NetworkBrowser] fallback to default translation for Manage network shares
< 170.014> wasTimerWakeup failed!
< 170.052> close failed in file object destructor:
< 170.054> IOError: [Errno 5] Input/output error
< 170.056> close failed in file object destructor:
< 170.058> IOError: [Errno 5] Input/output error
< 170.060> close failed in file object destructor:
< 170.064> IOError: [Errno 5] Input/output error
< 170.068> close failed in file object destructor:
< 170.071> IOError: [Errno 5] Input/output error
< 170.079> [SKIN] Parsing embedded skin <embedded-in-'PermanentClockScreen'>
< 170.212> Reading ['/usr/lib/enigma2/python/Plugins/SystemPlugins/Videomode/videowizard.xml']
< 170.354> getStepWithID: start
< 170.356> result: nothing
< 170.365> languageSelect 1234
< 170.506> [SKIN] Parsing embedded skin <embedded-in-'VideoWizard'>
< 170.516> [SKIN] Unable to find screen 'WizardMarginsTemplate' referred in screen '<embedded-in-'VideoWizard'>'
< 170.519> [SKIN] Unable to find screen 'WizardPictureLangTemplate' referred in screen '<embedded-in-'VideoWizard'>'
< 170.521> [SKIN] Unable to find screen 'RemoteControlTemplate' referred in screen '<embedded-in-'VideoWizard'>'
< 170.589> warning, skin is missing element arrowdown2 in <class 'Plugins.SystemPlugins.Videomode.VideoWizard.VideoWizard'>
< 170.593> warning, skin is missing element wizard in <class 'Plugins.SystemPlugins.Videomode.VideoWizard.VideoWizard'>
< 170.597> warning, skin is missing element arrowup2 in <class 'Plugins.SystemPlugins.Videomode.VideoWizard.VideoWizard'>
< 170.605> warning, skin is missing element rc in <class 'Plugins.SystemPlugins.Videomode.VideoWizard.VideoWizard'>
< 170.609> warning, skin is missing element arrowup in <class 'Plugins.SystemPlugins.Videomode.VideoWizard.VideoWizard'>
< 170.613> warning, skin is missing element languagetext in <class 'Plugins.SystemPlugins.Videomode.VideoWizard.VideoWizard'>
< 170.620> warning, skin is missing element arrowdown in <class 'Plugins.SystemPlugins.Videomode.VideoWizard.VideoWizard'>
< 170.625> warning, skin is missing element config in <class 'Plugins.SystemPlugins.Videomode.VideoWizard.VideoWizard'>
< 170.636> ++++++++++++***++**** VideoWizard-createSummary
< 170.688> Updating values in step 1
< 170.691> set LCD text
< 170.695> wizard step: {'code': u'self["portpic"].show()\nself.clearSelectedKeys()\nself.selectKey("OK")', 'text': 'Video input selection\n\nPlease press OK if you can see this page on your TV (or select a different input port).\n\nThe next input port will be automatically probed in 20 seconds.', 'displaytext': 'Select video input with up/down buttons', 'id': 'inputselection', 'condition': '', 'listevaluation': u'inputSelectionMade', 'timeoutaction': 'selectnext', 'nextstep': 'modeselection', 'code_async': '', 'codeafter_async': '', 'timeoutstep': '', 'list': [], 'onselect': u'inputSelectionMoved', 'dynamiclist': u'listInputChannels', 'timeout': 20, 'codeafter': '', 'config': {'screen': None, 'args': None, 'type': ''}}
< 170.698> wizard text Video input selection

Please press OK if you can see this page on your TV (or select a different input port).

The next input port will be automatically probed in 20 seconds.< 170.698>
< 170.701> set LCD text
< 170.703> code self["portpic"].show()
self.clearSelectedKeys()
self.selectKey("OK")< 170.704>
< 170.714> selectPic: arrowup
< 170.718> showing list, 1
< 170.720> self.list: <Components.Sources.List.List object at 0x2e848dcc>
< 170.722> self.list: <Components.Sources.List.List object at 0x2e848dcc>
< 170.723> setZPosition
< 170.725> dynamic list, calling listInputChannels
< 170.732> listInputChannels: [('Component', 'Component'), ('HDMI', 'HDMI'), ('HDMI-PC', 'HDMI-PC'), ('Scart', 'Scart')]
< 170.737> self.selection: Component
< 170.743> input selection moved: Component
< 170.744> inputSelect: Component
< 170.746> getModeList for port Component
< 170.749> modeList: []
< 170.756> self.selection: Component
< 170.761> input selection moved: Component
< 170.763> inputSelect: Component
< 170.764> getModeList for port Component
< 170.768> modeList: []
< 170.776> self.selection: Component
< 170.781> input selection moved: Component
< 170.785> inputSelect: Component
< 170.787> getModeList for port Component
< 170.794> modeList: []
< 170.801> showing config
< 170.804> setPixmapNum(0) failed! defined pixmaps: []
< 170.895> setValue 50
< 171.466> [ePopen] command: route -n | grep eth0
< 171.575> nameservers: [[208, 67, 222, 222], [208, 67, 220, 220], [217, 30, 129, 149], [194, 204, 152, 34]]
< 171.578> read configured interface: {'lo': {'dhcp': False}, 'eth0': {'dhcp': False, 'netmask': [0, 0, 0, 0], 'gateway': [0, 0, 0, 0], 'address': [0, 0, 0, 0]}}
< 171.581> self.ifaces after loading: {'eth0': {'preup': False, 'predown': False, 'ip': [0, 0, 0, 0], 'up': False, 'mac': '00:13:18:02:40:ab', 'dhcp': False, 'netmask': [0, 0, 0, 0], 'gateway': [0, 0, 0, 0]}}
< 171.602> AT plugin not found
< 171.605> SerienRecorder plugin not found
< 171.608> ER plugin not found
< 171.618> [OpenWebif] hooking original webif plugins
< 171.652> [OpenWebif] no plugins to load
< 171.712> [OpenWebif] started on 80
< 171.718> timeoutCounter: 19
< 172.699> timeoutCounter: 18
< 173.699> timeoutCounter: 17
< 174.699> timeoutCounter: 16
< 175.699> timeoutCounter: 15
< 176.699> timeoutCounter: 14
< 177.699> timeoutCounter: 13
< 178.699> timeoutCounter: 12
< 179.699> timeoutCounter: 11
< 180.699> timeoutCounter: 10
< 181.699> timeoutCounter: 9
< 182.699> timeoutCounter: 8
< 183.699> timeoutCounter: 7
< 184.699> timeoutCounter: 6
< 185.699> timeoutCounter: 5
< 186.699> timeoutCounter: 4
< 187.699> timeoutCounter: 3
< 188.699> timeoutCounter: 2
< 189.699> timeoutCounter: 1
< 190.699> timeoutCounter: 0
< 190.700> selection next item
< 190.705> self.selection: HDMI
< 190.710> input selection moved: HDMI
< 190.712> inputSelect: HDMI
< 190.714> getModeList for port HDMI
< 190.718> modeList: []
< 192.563> self.selection: HDMI
< 192.568> input selection moved: HDMI
< 192.570> inputSelect: HDMI
< 192.572> getModeList for port HDMI
< 192.578> modeList: []
< 192.586> self.selection: HDMI
< 192.594> input selection moved: HDMI
< 192.596> inputSelect: HDMI
< 192.599> getModeList for port HDMI
< 192.605> modeList: []
< 192.613> current: ('HDMI', 'HDMI')
< 192.621> input selection moved: HDMI
< 192.623> inputSelect: HDMI
< 192.625> getModeList for port HDMI
< 192.629> modeList: []
< 192.632> down
< 192.648> timeoutCounter: 19
< 192.699> timeoutCounter: 18
< 193.699> timeoutCounter: 17
data[0] 0xe0, data[1] 0x1f
160 - OK
pRead < 00010160
**** 120848 1 ****
[SEM] UP
KEY_PRESS - 160 1
++++ 0 ms ++++
< 193.796> action -> WizardActions ok
< 193.797> OK
< 193.799> finished
< 193.802> current: ('HDMI', 'HDMI')
< 193.807> inputSelectionMade: HDMI
< 193.809> inputSelect: HDMI
< 193.811> getModeList for port HDMI
< 193.815> modeList: []
< 193.817> getStepWithID: modeselection
< 193.819> result: 1
< 193.820> Updating values in step 2
< 193.822> set LCD text
< 193.826> wizard step: {'code': u'self.clearSelectedKeys()\nself.selectKey("UP")\nself.selectKey("DOWN")\nself["portpic"].hide()', 'text': 'Video mode selection.', 'displaytext': 'Select video mode', 'id': 'modeselection', 'condition': '', 'listevaluation': u'modeSelectionMade', 'timeoutaction': 'selectnext', 'nextstep': 'rateselection', 'code_async': '', 'codeafter_async': '', 'timeoutstep': '', 'list': [], 'onselect': u'modeSelectionMoved', 'dynamiclist': u'listModes', 'timeout': 20, 'codeafter': '', 'config': {'screen': None, 'args': None, 'type': ''}}
< 193.829> wizard text Video mode selection.
< 193.831> set LCD text
< 193.834> code self.clearSelectedKeys()
self.selectKey("UP")
self.selectKey("DOWN")
self["portpic"].hide()< 193.835>
< 193.841> selectPic: arrowdown
data[0] 0xe0, data[1] 0x1f
160 - OK
pRead < 00010160
**** 49 1 ****
< 193.847> selectPic: arrowup
< 193.851> showing list, 2
< 193.854> self.list: <Components.Sources.List.List object at 0x2e848dcc>
< 193.855> self.list: <Components.Sources.List.List object at 0x2e848dcc>
< 193.856> setZPosition
< 193.859> dynamic list, calling listModes
< 193.862> modes for port HDMI
< 193.864> getModeList for port HDMI
< 193.867> modeslist: []
< 193.880> showing config
< 193.882> Now: 2
< 193.884> close failed in file object destructor:
< 193.886> IOError: [Errno 5] Input/output error
< 193.887> Now: 2
data[0] 0xe0, data[1] 0x1f
160 - OK
pRead < 00010160
**** 50 1 ****
++++ 53 ms ++++
data[0] 0xe0, data[1] 0xff
KEY_RELEASE - 160 00 1 1 CAUSE=Timeout
---- 152 ms ----
[SEM] DOWN
< 194.831> timeoutCounter: 19
< 195.831> timeoutCounter: 18
< 196.831> timeoutCounter: 17
< 197.831> timeoutCounter: 16
< 198.831> timeoutCounter: 15
< 199.831> timeoutCounter: 14
< 200.831> timeoutCounter: 13
< 201.831> timeoutCounter: 12
< 202.831> timeoutCounter: 11
< 203.831> timeoutCounter: 10
data[0] 0xe0, data[1] 0x1f
160 - OK
pRead < 00020160
**** 10753 2 ****
[SEM] UP
KEY_PRESS - 160 2
++++ 0 ms ++++
< 204.649> action -> WizardActions ok
< 204.651> OK
< 204.652> finished
< 204.654> getStepWithID: rateselection
< 204.656> result: 2
< 204.657> Updating values in step 3
< 204.661> set LCD text
< 204.665> wizard step: {'code': u'self.clearSelectedKeys()\nself.selectKey("UP")\nself.selectKey("DOWN")', 'text': 'Refresh rate selection.', 'displaytext': 'Select refresh rate', 'id': 'rateselection', 'condition': u'self.condition = (self.port != "DVI" or self.mode == "PC")', 'listevaluation': u'rateSelectionMade', 'timeoutaction': 'selectnext', 'nextstep': None, 'code_async': '', 'codeafter_async': '', 'timeoutstep': '', 'list': [], 'onselect': u'rateSelectionMoved', 'dynamiclist': u'listRates', 'timeout': 20, 'codeafter': '', 'config': {'screen': None, 'args': None, 'type': ''}}
< 204.668> wizard text Refresh rate selection.
< 204.670> set LCD text
< 204.672> code self.clearSelectedKeys()
self.selectKey("UP")
self.selectKey("DOWN")< 204.673>
< 204.680> selectPic: arrowdown
< 204.684> selectPic: arrowup
< 204.688> showing list, 3
< 204.689> self.list: <Components.Sources.List.List object at 0x2e848dcc>
< 204.693> self.list: <Components.Sources.List.List object at 0x2e848dcc>
< 204.694> setZPosition
< 204.696> dynamic list, calling listRates
data[0] 0xe0, data[1] 0x1f
160 - OK
pRead < 00020160
**** 50 2 ****
< 204.702> modes for port HDMI and mode None
< 204.704> getModeList for port HDMI
< 204.718> showing config
< 204.721> Now: 3
< 204.723> close failed in file object destructor:
< 204.724> IOError: [Errno 5] Input/output error
< 204.725> Now: 3
data[0] 0xe0, data[1] 0x1f
160 - OK
pRead < 00020160
**** 50 2 ****
data[0] 0xe0, data[1] 0x1f
160 - OK
pRead < 00020160
**** 49 2 ****
++++ 3 ms ++++
data[0] 0xe0, data[1] 0x1f
160 - OK
pRead < 00020160
**** 50 2 ****
data[0] 0xe0, data[1] 0xff
++++ 101 ms ++++
KEY_RELEASE - 160 00 2 2 CAUSE=Timeout
---- 154 ms ----
[SEM] DOWN
< 205.667> timeoutCounter: 19
< 206.667> timeoutCounter: 18
< 207.667> timeoutCounter: 17
< 208.667> timeoutCounter: 16
< 209.667> timeoutCounter: 15
< 210.667> timeoutCounter: 14
< 211.667> timeoutCounter: 13
< 212.667> timeoutCounter: 12
< 213.667> timeoutCounter: 11
< 214.667> timeoutCounter: 10
data[0] 0xe0, data[1] 0x1b
6C - DOWN
pRead < 0003006C
**** 10028 3 ****
[SEM] UP
KEY_PRESS - 6c 3
++++ 0 ms ++++
< 214.879> action -> WizardActions down
< 214.880> down
data[0] 0xe0, data[1] 0x1b
6C - DOWN
pRead < 0003006C
**** 53 3 ****
data[0] 0xe0, data[1] 0x1b
6C - DOWN
pRead < 0003006C
**** 46 3 ****
data[0] 0xe0, data[1] 0x1b
6C - DOWN
pRead < 0003006C
**** 50 3 ****
++++ 2 ms ++++
data[0] 0xe0, data[1] 0xff
KEY_RELEASE - 6c 00 3 3 CAUSE=Timeout
---- 155 ms ----
[SEM] DOWN
< 215.667> timeoutCounter: 19
data[0] 0xe0, data[1] 0x1a
67 - UP
pRead < 00040067
**** 1297 4 ****
[SEM] UP
KEY_PRESS - 67 4
++++ 0 ms ++++
< 216.327> action -> WizardActions up
< 216.329> up
data[0] 0xe0, data[1] 0x1a
67 - UP
pRead < 00040067
**** 50 4 ****
data[0] 0xe0, data[1] 0x1a
67 - UP
pRead < 00040067
**** 50 4 ****
++++ 52 ms ++++
data[0] 0xe0, data[1] 0xff
KEY_RELEASE - 67 00 4 4 CAUSE=Timeout
---- 153 ms ----
[SEM] DOWN
< 216.667> timeoutCounter: 19
< 217.667> timeoutCounter: 18
< 218.667> timeoutCounter: 17
< 219.667> timeoutCounter: 16
< 220.667> timeoutCounter: 15
< 221.667> timeoutCounter: 14
data[0] 0xe0, data[1] 0x1c
6A - RIGHT
pRead < 0005006A
**** 6137 5 ****
[SEM] UP
KEY_PRESS - 6a 5
++++ 0 ms ++++
< 222.565> action -> WizardActions right
< 222.566> right
data[0] 0xe0, data[1] 0x1c
6A - RIGHT
pRead < 0005006A
**** 50 5 ****
data[0] 0xe0, data[1] 0x1c
6A - RIGHT
pRead < 0005006A
**** 50 5 ****
< 222.667> timeoutCounter: 19
++++ 51 ms ++++
data[0] 0xe0, data[1] 0xff
KEY_RELEASE - 6a 00 5 5 CAUSE=Timeout
---- 151 ms ----
[SEM] DOWN
< 223.667> timeoutCounter: 18
< 224.667> timeoutCounter: 17
< 225.667> timeoutCounter: 16
< 226.667> timeoutCounter: 15
< 227.667> timeoutCounter: 14
< 228.667> timeoutCounter: 13
< 229.667> timeoutCounter: 12
< 230.667> timeoutCounter: 11
< 231.667> timeoutCounter: 10
< 232.667> timeoutCounter: 9
< 233.667> timeoutCounter: 8
< 234.667> timeoutCounter: 7
< 235.668> timeoutCounter: 6
< 236.667> timeoutCounter: 5
< 237.667> timeoutCounter: 4
< 238.668> timeoutCounter: 3
< 239.668> timeoutCounter: 2
< 240.668> timeoutCounter: 1
< 241.668> timeoutCounter: 0
< 241.669> selection next item
< 241.670> down
< 242.668> timeoutCounter: 19
< 243.668> timeoutCounter: 18
< 244.668> timeoutCounter: 17
< 245.668> timeoutCounter: 16
< 246.668> timeoutCounter: 15
< 247.668> timeoutCounter: 14
< 248.668> timeoutCounter: 13
< 249.668> timeoutCounter: 12
< 250.668> timeoutCounter: 11
< 251.668> timeoutCounter: 10
< 252.668> timeoutCounter: 9
Grzechu
 
Posty: 6
Dołączył(a): poniedziałek, 12 września 2016, 19:44
Dekoder:: CUBEREVO 9000

Re: PKT Hyperion 5.4 CUBEREVO

Postnapisał facet środa, 14 września 2016, 01:09

A sprawdź jeszcze coś takiego....
Na tym nowym penie zrob jedną i tylko jedną partycję i na niej rozpakuj ostatniego hyperiona. No i sprawdź:)
Jak się kiedyś bawiłem w partycje na penie to też mi się cuda działy:)
Pozdrawiam
Facet
{9000HD rev.2 + SifTeam 8873 (flash) + Hyperion V5.5 (pendrive) + HDD 250 GB >>> TV SHARP 52LE830}
"I wejrzał Pan na pracę naszą, i był zadowolony. A potem zapytawszy o zarobki nasze, usiadł i gorzko zapłakał"
facet
 
Posty: 437
Dołączył(a): czwartek, 3 września 2009, 13:24

Poprzednia stronaNastępna strona

Powrót do Image PKT

Kto przegląda forum

Użytkownicy przeglądający ten dział: Google [Bot] i 1 gość